ISO-MME

Posted: **Mon Nov 20, 2023 3:36 pm**

This topic has been extracted from the discussion of
Additional field descriptors in MME file for active safety
viewtopic.php?t=675

The proposed descriptors for nominal velocity has already been taken over for the "intended velocity"
to the passive safety testing:
Additional descriptor for "Intended Velocity"
viewtopic.php?t=685

In the same way we decided to provide an extension for the lateral velocity of a test object.
The related (optional) descriptor is:

Code: Select all

Lat. vel. test object x     :<value>

with 
x = tob number
<value> = integer or float value or NOVALUE

This extension will be documented in the next RED A (estimated Q1/2024)

Posted: **Tue Nov 19, 2024 1:45 pm**

Dear All,
this topic is also related to the new proposal vor RED A:
viewtopic.php?t=718

Here we have also a proposal for the additional velocity information:

: ISO_TS13499_RED_A_V16Rev3_20240802_Velocity.png (6.37 KiB) Viewed 21279 times

Posted: **Tue Nov 19, 2024 1:50 pm**

A new proposal using the TOB abbreviation could be:

Code: Select all

123456789012345678901234567890123
Nominal velocity TOB 1      :	
Lateral velocity TOB 1      :
Nom. lateral velocity TOB 1 :

Better readability (less abreviations).
Please vote

Kind regards,
Dirk

Posted: **Tue Dec 03, 2024 2:29 pm**

Hello,

I support this idea of this descriptor “lateral velocity” and the shortened “TOB” for the test object.
“TOB” would be a benefit for many new descriptors in ISO MME due to the restriction to 28 characters.

Best regards
Martin

Posted: **Tue Oct 28, 2025 4:51 pm**

Dear all,
based on the discussion in the meeting today I have summarized the base information and options in the attached PDF:

Options for new velocity descriptors.pdf: (15.25 KiB) Downloaded 6 times

Finally we identified a new topic for "longitudinal velocity" to be found in the proposals and in the CA004 document from EuroNCAP.
Actually, this overlaps with the current "velocity" and "impact side" information in passive safety testing.
I will prepare a separate topic for this discussion soon, but in the active safety sub-board.

Kind regards,
Dirk

ISO-MME

Additional descriptor for "Lateral velocity"

Additional descriptor for "Lateral velocity"

Re: Additional descriptor for "Lateral velocity"

Re: Additional descriptor for "Lateral velocity"

Re: Additional descriptor for "Lateral velocity"

Re: Additional descriptor for "Lateral velocity"