ISO-MME

Hello colleagues,
For EuroNCAP VTC 2026 documentation we need to provide info on three masses from simulation. We propose to use following codes :
Mass seat: ??SEAT000000MA0X
Mass Dummy, here ie. HF: ??OCCU0000HFMA0X
Mass Test Object: ??SLED000000MA0X

Any concerns or better proposals from your side ?

Thank you and best regards,

Frank

Dear Frank,

That seems like a well-thought-out proposal.
No objections from my side.
We should make an official decision on the next meeting.

Would it make sense to have a figure that provides an overview on codes
specific for Simulation?
In the MME_POSSIBLE_CHANNEL table of the database we have currently only
the categorie "AirbagSim". But I guess this is no good match for grouping these
new code proposals?

Kind regards,
Dirk

After reviewing the Euro NCAP CP-005 once more we come to following conclusion :

For provisioning this information to EuroNCAP there are three MME Header attributes defined which need to be used. The proposed ISO-codes are needed due to the internal data processing and will be used from us for this purpose.

The header defined attributes to use are defined on page 15 in CP-005 (https://www.euroncap.com/media/95050/cp ... on-v12.pdf