Additional descriptor for "Lateral velocity"

Suggestions for new codes
Post Reply
DiVe
Posts: 454
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Additional descriptor for "Lateral velocity"

Post by DiVe »

This topic has been extracted from the discussion of
Additional field descriptors in MME file for active safety
viewtopic.php?t=675

The proposed descriptors for nominal velocity has already been taken over for the "intended velocity"
to the passive safety testing:
Additional descriptor for "Intended Velocity"
viewtopic.php?t=685

In the same way we decided to provide an extension for the lateral velocity of a test object.
The related (optional) descriptor is:

Code: Select all

Lat. vel. test object x     :<value>

with 
x = tob number
<value> = integer or float value or NOVALUE
This extension will be documented in the next RED A (estimated Q1/2024)
DiVe
Posts: 454
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Additional descriptor for "Lateral velocity"

Post by DiVe »

Dear All,
this topic is also related to the new proposal vor RED A:
viewtopic.php?t=718

Here we have also a proposal for the additional velocity information:
ISO_TS13499_RED_A_V16Rev3_20240802_Velocity.png
ISO_TS13499_RED_A_V16Rev3_20240802_Velocity.png (6.37 KiB) Viewed 21281 times
DiVe
Posts: 454
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Additional descriptor for "Lateral velocity"

Post by DiVe »

A new proposal using the TOB abbreviation could be:

Code: Select all

123456789012345678901234567890123
Nominal velocity TOB 1      :	
Lateral velocity TOB 1      :
Nom. lateral velocity TOB 1 :
Better readability (less abreviations).
Please vote :-)

Kind regards,
Dirk
washausen
Posts: 29
Joined: Fri May 21, 2021 12:25 pm
Company: Volkswagen AG

Re: Additional descriptor for "Lateral velocity"

Post by washausen »

Hello,

I support this idea of this descriptor “lateral velocity” and the shortened “TOB” for the test object.
“TOB” would be a benefit for many new descriptors in ISO MME due to the restriction to 28 characters.

Best regards
Martin
DiVe
Posts: 454
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Additional descriptor for "Lateral velocity"

Post by DiVe »

Dear all,
based on the discussion in the meeting today I have summarized the base information and options in the attached PDF:
Options for new velocity descriptors.pdf
(15.25 KiB) Downloaded 6 times
Finally we identified a new topic for "longitudinal velocity" to be found in the proposals and in the CA004 document from EuroNCAP.
Actually, this overlaps with the current "velocity" and "impact side" information in passive safety testing.
I will prepare a separate topic for this discussion soon, but in the active safety sub-board.

Kind regards,
Dirk
Post Reply

Return to “Additional codes”